NORTH AMERICAN T-28A TROJAN WINGS

Inner trojan wings, main gear included. Requires repair for use on flying aircraft. Good for static display or repair. $2,500 USD

DERELICTS / PROJECTS / PARTS / WRECKS / SALVAGE WANTED!

Buying aircraft in nonflying condition in the USA, East of The Rockies. Michigan based family business, we've disassembled and saved aircraft of all sizes from a J3 Cub to Multiple DC-3s. We've done jets too! We specialize in off airfield recovery. We don't part out aircraft that can be saved. We don't unnecessarily cut up aircraft to move them quickly, we disassemble them. Give us a call, we buy 1 airplane or a whole hangar full, whatever you have.

HAMILTON STANDARD 23E50 PROPELLER

Uncut 6477A-0 paddle blades. Hub, all pieces, No corrosion. Located Oklahoma City, Oklahoma $11,000 USD

PZL SHEVTSOV ASZ-62IR-M18 DROMADER ENGINE

947SMOH 1309TT. Engine is on the mount with complete exhaust and baffle. Mount is attached to metal shipping stand. Pickled Nov 2014 according to instruction WT-62.04.01K. Came off for turbine conversion. If you don't know about these engines, it is a 1,000 horsepower license built variant of the Curtiss-Wright 1820. Many parts can be swapped between. The PZL built engines are the best of the bunch. $12,500 USD for engine I also have some (unknown condition) AW-2 propeller hubs & blades. I have some extra engine accessories, cases, internals. I have 2 other core ASZ62 engine. I have some PZL-3 engine parts & repair manuals.

1940 FAIRCHILD 24W-40 AIRFRAME

This is a very solid airframe to start your own Fairchild. “Project” Consists of Fuselage, Landing Gear Inventory (parts, not gear legs), Vertical Stabilizer & Rudder, Firewall, Seats, Control Sticks, Rudder Pedals, Various Small Parts, and original wood for patterns. More than what is pictured. Registration was Cancelled in 1970 but has Airworthiness Certificate, No other Logs. $2,500 USD

STEEN SKYBOLT AIRFRAME AND PARTS LOT

This came from an estate we acquired in the late summer of 2022. Airframe is solid but could use a cleaning. She was primed & put in the back of the hangar. Second set of gear & tail feathers were bead blasted but not primed. They will need to be reblasted. This is a great start to a SkyBolt project for a fraction of the cost & work. The fuselage assembly is $15,000 from Steen. That does not include all the tail feathers, or the spare sets we’re including! This is light, could be hauled behind a car. Length is approximately 14.5 feet long, width is 34 inches, 54 inches to the top of the vertical. $2,200 USD