Piper Warrior II PA28 Fuselage

PA28 Warrior 2 fuselage which is scrap and not airworthy. It has some good parts including windscreens, rear seat and windows. Would be suitablae as a project, simulator, etc. Can possibly deliver depending on location, by negotiation. We are situated in Gloucestershire.

SOCATA TB20 parts + equipts & avionics

Second airframe in storage, complete, good condition always hangared. Wings & wings attaches / fittings Vertical fin and rudder with trim tab & control. Engine cowlings. composite tail cone. Landing gear parts Wheels and brakes calipers, park brake valve. Nose gear mount. Flight and Engine controls. Landing, taxi & nav lights. Rotating beacon. Instruments panels. Cabin upholstery, vents & temp controls. Front seats, seat belts. Heated Pitot tube. Stall Warning sensor. Electrical CB & relays panels. SOCATA engine instruments vertical cluster. Fuel totalizer Hoskins FT101 with sender. Warning & Alarm lights panel. Autopilot King KAP 150, 2 axis, control panel, all servos including pitch auto-trim. Radio rack, cooling fan. Antennas. King IFR dual voltage avionics. Send needed part numbers. Pictures available on request. See details on 3 other Full Stop Ads in categories Parts / Avionics / Equipment. Low shipping charge to the US, thanks to my fellow airline pilots + UPS Ground. Available at Pontoise Airport LFPT, 25 km West of Paris. Daniel COSTES, EAA 147646, France. Skype: danfly4ever. Home +33 1 34 42 02 94. Cellular +33 6 73 07 15 67. Leave message when calling.

SOCATA TB20 parts + equipts / avionics

Vertical fin, rudder, rudder trim tab & control. Right cabin & bags compartment doors, no locks Wings attaches / fittings. Right aileron Main ldg gear parts, except shock absorbers. Nose gear parts. Nose gear mount. Hydraulic valves. Flight & engine controls. Cabin ventilation & heat controls, vent eyeballs. Instruments panel, left side Electrical panels, switches & systems controls, current breakers. Ground power plug. Rotating beacon Fuel tanks caps (2). Vacuum system, engine driven, complete. Vacuum system, std-by 28 volts, complete. Airframe anti-ice TKS system, complete. Woodward prop governor C 210-761. Engine mount. Flight instruments. Heated Pitot tube. TB20 std engine cluster & instruments. Radio rack cooling fan & antennas.. King avionics include: KMA 24 audio panel. KG 102A directionnal gyro. KMT 112 magnetic transmitter, KA51B controller. KI 525A HSI. KN 72 VOR LOC converter, KR 21 MKR receiver & indicator. See details on 3 other Full Stop Ads in categories Parts / Avionics / Equipment. Low shipping charge to the US, thanks to my fellow airline pilots + UPS Ground. Available at Pontoise Airport LFPT, 25 km West of Paris. Ask for detailed P/N & pictures. Leave message when calling. Daniel COSTES, EAA 147646, France. Skype: danfly4ever Home +33 1 34 42 02 94. Cellular +33 6 73 07 15 67.

Pitts S1-SS Project

Pitts S1-SS in re-built condition by EASA A&P, Engine (Lycoming O-360) with Bendix Pressure Carb & Christen 801 Inverted Oil System re-build, Sensenich fixed pitch propeller polished, Standard wings with Steen Aero Pitts S1-SS Wing Construction Kit incl. leading edge and special aileron hinges by Steen Aero (bigger ailerons and higher roll-rate, crisp handling), Custom instrument panel mit Engine Monitoring System, Trig ADS-B Out Transponder & Trig 8,33 kHz Radio, Aluminum spring landing gear (easy to land), Truss completely re-build and welded by certified aircraft welder, painted silver, All hardware, hoses, lines new, Sheet metal parts partly new and painted (dark blue, silver), Needs assembly and fabric job, Requests via e-mail only.

Piston Provost G-BLIW and G-CMIP 1954.

For Sale or Trade Rare Ex Irish Air Corps Percival Provost Project. Sale as on going project or Group Syndicate. This is the last known potentially airworthy IAC Provost T51 in private ownership in the world. Entry level tail wheel warbird with very classic British handling. Fully aerobatic, crisp 90 deg roll rate frise ailerons, loops from cruise. ROC 2200 fpm. 550hp Alvis Leonides Radial Supercharged and fully inverted fuel and oil systems. MTOW 1995 kg. capable of being flown on a UK LAPL. UK Permit to Fly or Subject to LAA Approval Airframe 2431 Total Time. Last Flown 2010. Significant detail work to restore to fly carried out. Some Sheet repair to the fuselage required, major work done. Wings require repairs, which could be organised or sold as is. Currently in RAF Colours Trades considered. Enquiries by email, please

Zlin 326 / 526 spare parts

Many New - Available for aircraft: Zlin 326, Zlin 526, Zlin 42.Engines: M137A/Z, M337AK, Propellers: Avia V503.Plinth P.N: Z.326.610.06; Z-326-515-01-08; Z.326.610.05; Z.326.211.02P and many others.

Looking for Aircraft Projects

Looking for Aircraft Projects. Aircraft out of Annual or in bad condition. Also looking for damaged Aircraft. Please offer everything.

Looking for Piper Cub J3 (L4) PA-18 Super Cub projects!

Ahoy! Looking for Piper Cub J3 (L4), PA-18 projects. Complete, damaged, or parts only, at any shape or condition! Contact Marek for details: phone: +420 602 779 356 www.classicaircraft.cz

Sonex A project for sale

Sonex A project for sale € 18.000 Project originally started in Germany under the supervision of the OUV. Extensive documentation available, including all purchase invoices and import documents. The project has serial no. 0211 and the original drawing package is included. The airframe is complete. The cockpit is currently designed as a single-seater, but can be adapted as a 2-seater again. The engine is a Sauer 2400 (95 hp). Slightly more power than the Aerovee. A cowling still needs to be made for it. The project can be purchased without the engine for €15,000. --- View 1 --- View 2 --- View 3 --- View 4 --- View 5 ---

Taylor Titch Project £4000 REDUCED PRICE

Taylor Titch project for sale. Has flown 15 hours total, Now offered as a project. Airframe only. No engine or prop. Pictures on request Full set of cowling molds included with aircaft No instruments Fuel system in place and engine frame to fit a continental engine. For sale due to other projects taking up time. £4,000.00 Pictures on request

RV-14A, kit for quick assembly

For sale is a new kit for quick assembly of an RV-14A aircraft. Assembled at a professional aviation plant, coated with Vans Aircraft primer. Full set. At Van Aircraft it is also possible to purchase an engine and propeller for this kit at a special price. Located in Slovenia. Cost 66,000 euros + VAT. --- View 1 --- View 2 --- View 3 --- View 4 --- View 5 ---

Vintage aircraft project, license built Bücker 181 Bestmann!

Bücker 181 Bestmann, Egyptian license built "Gomhouria MkVI" restoration projects available, various conditions and pricing, excellent spare parts situation for engines and aircraft. - Low hours on engines (Continental O-300A) and aircraft. - Documentation and history available. - Aircraft complete. - Spare preserved engine with low hours included! - German type certificate. - Delivery possible - Sales prices vary, depending on condition - Starting at 20.000 EUR plus VAT, where applicable - Located Northern Germany, some ready for viewing. Please make inquiries via phone +4915758976651 or via info@mika-business.com. --- View 1 --- View 2 --- View 3 --- View 4 ---

Cessna 172G Customisable project

• IAirCraft Invest introduces Project 172G: a revitalized Cessna for the modern aviator. • This new project involves transforming the Cessna 172G into a customized, state-of-the-art aircraft. • While still in progress, we offer the opportunity for customization in performance, avionics, and interior design, tailored to your preferences. • As specialists in renewing aircraft, we ensure the finished 172G will be a unique blend of classic aviation and contemporary innovation. • Contact us to be a part of this exciting project and make the 172G truly yours. • If you have your own plane or project you would like to process let us know. _/ Plane Information/ Single engine_Continental_O-300-D_0 since overhaul/ 1966_/ Registration OK-VKF / 7505 TT / Price 150.000 EURO / --- View image ---

Customizable Cessna 172N Project

• We're excited to announce our ongoing project: the Cessna 172N, currently under renovation. This aircraft will be a modern classic, offering the best of both worlds. Our team is meticulously working to ensure it meets the highest flight certification standards. _/ • Key Features in Progress: _/ • 1. Advanced Customization: Tailoring the aircraft according to customer preferences. _/ • 2. Superior Avionics: Upgrading to state-of-the-art avionics systems. _/ • 3. Enhanced Performance: Improving engine and overall aircraft performance. _/ • Upon completion, the Cessna 172N will not just be a plane, but a reflection of your personal style and flying passion. This project is all about creating a unique, personalized flying experience. _/ • If you have your own plane or project you would like to process let us know. _/ • _/ Plane Information/ Single engine_Lycoming_0-320-H2AD_ / 0 since overhaul / Total engine time 781 hours / 1979_N-6473D/ 5200 TT/ Price 140.000 EURO / --- View image ---

Grumman AA5 Traveler Customisable project

• Introducing the Grumman AA5 Traveler 1972 • Our studio, renowned for refurbishing general aviation aircrafts, proudly presents the Grumman AA5 Traveler. We've applied our expertise in aircraft renovation to this model, ensuring it meets flight-certification standards and is ready for the skies. • The Grumman AA5 Traveler is a testament to heritage and modern innovation. With advanced customization options, including avionics and performance enhancements, it outperforms new models in both quality and value. This aircraft isn't just a purchase; it's a bespoke flying experience, tailor-made to reflect your unique style and passion for aviation. • Visit our website for more information and to explore the possibilities of making the Grumman AA5 Traveler your own. If you have a specific plane or project in mind, feel free to contact us to discuss how we can bring your vision to life. • Plane Information. _/ Single engine_Lycoming O-320-E2G_McCauley 1C172/SBTM7359 / 0 SMO / Price 80000 EURO. --- View 1 --- View 2 ---